DESCRIPTION

Bantape Alu foil 3025 CW/R nominal 30 micron (1.2 mil) high tensile strength aluminium foil backing, combined with a cold weather flame retardant acrylic adhesive, protected by an easy-release silicone release paper. The workable foil applies easily to both fibrious and sheet metal ducts and conforms to irregular surfaces.

Bantape Alu foil 3025 CW/R excels in demanding temperature and humidity applications and provides superior performance and durability over a wide range of environmental conditions.

PRODUCT USE

HVAC industry for joining and sealing Foil-Scrim-Kraft facing laminated fiberglass blanket/duct board joints and seams, joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.

FEATURES

•  Aluminium backing provides excellent reflection of both heat and light
•  Cold weather adhesive with moderate adhesion offers good sealing and bonding on
•  Foil-scrim-kraft facing joints and seams in HVAC ductwork application
•  Good aging resistance both indoors and outdoors
•  Low moisture vapour transmission rate offers excellent sealing and patching performance
•  IMO Resolution MSC 61(67) Annex I Part 5 and Annex 2 IMO Resolution MSC 61(67) Annex 1 Part 2 and Annex 2 UL 723 Listed (Flame/Smoke Rating)
  PRODUCT FORM & SIZE AVAILABLECut Roll: 75mm(3″) / 100mm(4″)Log Roll: 1200mm x 45m/50m

  Jumbo Roll: 1200mm x 1000mm/1200mm/1350mm

  Important Note

  1. The data above are typical values only and should not be used for specification purpose.

  2. Tolerance: Weight and thickness: ±10%; Width: ±3mm; Length: Cut Roll ±0.3m; Jumbo Roll ±0.5%
  Download Product Brochure